Product Description

A multipurpose putty formulated for the glazing of wooden and metal window frames with single glass. Designed for use in bedding and external fronting single glass into primed softwood and hardwood frames which will subsequently be painted. Can also be used to glaze single glass into concrete or stone surrounds after prior sealing with an appropriate sealer.

Advantages: Easy to apply and economical.

Limitations: Not suitable for internal fronting or when the frame is to be stained. Do not use on sealed units.

Finish: Matt.

Application: By palette knife or blade.

Thinning: Do not thin.

Spreading Capacity: 1 Kg will glaze approximately 4 linear metres of glass.

Drying Times: Skin forms after approx. 2-4 days outdoors dependant on ambient temperature and humidity. May take up to 2 months to fully cure subject to temperature.

Equipment Cleaner: Crown White Spirits.

Colour: Grey

Pack Sizes:

• 1 kg packed 24 x 1kg boxes
• 2 kg packed 12 x 2kg boxes
• 8 kg packed in singles
• 25 kg packed in singles
• 40 kg packed in singles

Availability: From Crown Depots in Nairobi, Mombasa and Kisumu or through Crown Stockists.

Surface Preparation: Remove all dust, grease and lose material from the rebate. Any moisture on the timber should be wiped off using a clean paper towel or other absorbent material to give a dry surface.

Application: Check the condition of the primer or stain on softwood timber frames, especially the rebate and glazing surface of the beads. Any section which has been partially missed or is considerably weathered should be reprimed before glazing. Rebates of hardwood frames which are to be protected with clear varnish should be sealed with a sealer. Location blocks should be used inside hung opening windows to hold the glass in place.

When using as back bedding, apply to rebate. Push in glass and leave a thickness of 1.5mm by 2mm so as to achieve sufficient load bearing properties. The maximum fillet size to allow correct setting is 15mm high x 25mm wide. Do not reduce the fillet size below 8mm high x 10mm wide.

Finishing: The putty must be painted as soon as it has formed a skin firm enough to accept the actions of overcoating. Apply the first coat usually within 7 – 21 days. The final coat should be applied within 28days.

Health & Safety: Keep out of the reach of children. Wash hands after use. Safety data sheet available for professional user on request. Dispose of empty packaging in accordance with regulations.